{{ $t('shop.all.spaetbestellservice.hinweis') }}
Position drive dimensions | 10 |
Flange drilling screen | F04 |
Swivel angle [deg] | 90 |
Adjustable range end position at 0° [deg] | -5 to 5 |
Adjustable range end position at 90° [deg] | -5 to 5 |
Shaft connection Depth [mm] | 10 |
Standard connection to fitting | ISO 5211 |
installation position | arbitrary |
Principle of operation | double acting |
Construction set up | Toothed rack/pinion |
Closing direction | Right closing |
Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
Connection for position controllers and position feedback signal comply with standard | VDI/VDE 3845 Size AA 1 |
Safety Integrity Level (SIL) | Produkt kann eingesetzt werden in SRP/CS bis SIL 2 High Demand |
Operating pressure [bar] | 2 to 8 |
Nominal operating pressure [bar] | 5,5 |
CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
Certified awarding point | TÜV Rhineland |
ATEX gas category | II 2G |
ATEX dust category | II 2D |
Ex ignition protection type gas | Ex h IIC T4 Gb X |
Ex ignition protection type dust | Ex h IIIC T105°C Db X |
Ex ambient temperature | -20°C <= Ta <= +80°C |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium |
Oiled operation possible (required in further operations), Pressure dew point 10°C under ambient and medium temperature |
Bearing temperature [°C] | -20 to 60 |
ambient temperature [°C] | -20 to 80 |
Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 10,3 |
Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 10,3 |
Information about torque | The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling. |
Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 1,0 |
Product weight [g] | 965 |
Shaft connection | T9 |
Pneumatic connection | G1/8 |
Material information | RoHs compliant |
Connection plate material | Aluminium wrought alloy, anodised |
Cover material | Alu-Druckguss, beschichtet |
Seals material | NBR |
Housing material | Aluminium wrought alloy, anodised |
Piston material | Aluminium die casting |
Bearing material | POM |
Lug material | Cast stainless steel |
Screws material | High-alloyed stainless steels |
Shaft material | High-alloyed stainless steels |
{{ $t('shop.all.gewicht') }} | 965 g / Stk |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84123900 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Er is een fout opgetreden, laad de pagina opnieuw en probeer het nogmaals.