VZXA-B-TS7-2"-M2-V14T-10-M-90# (8060553) Angle seat val.

Item number:

OT-FESTO072712

pcs
Properties
Con­struc­tion set up Pop­pet valve with di­aphragm ac­tu­a­tor
Ac­tu­a­tion type pneu­matic
in­stal­la­tion po­si­tion ar­bi­trary
Fas­ten­ing type pipe in­stal­la­tion
Line con­nec­tion Gewinde­muffe 2 NPT nach ANSI/ASME B 1.20.1
Valve func­tion 2/2
Flow di­rec­tion Not re­versible
Medium pres­sure [bar] 0 to 10
Reset mode Me­chan­i­cal spring
Con­trol type Re­mote con­trolled
Pneu­matic con­nec­tion fe­male thread G1/8
Be­trieb­s­druck Mpa [MPa] 0,5 bis 0,7
Op­er­at­ing pres­sure [bar] 5 to 7
Op­er­at­ing pres­sure [psi] [psi] 72,5 bis 101,5
medium Hy­draulic oil on the basis of min­eral oil,
Inert gases,
min­eral oil,
Neu­tral liq­uids,
Water,
Fil­tered com­pressed air, fil­ter poros­ity 200 µm,
steam
Flow di­rec­tion Lower valve seat, for gas and liq­uid media
Con­trol of the medium On/off mode
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
Max. vis­cos­ity [mm²/s] 600
Medium tem­per­a­ture [°C] -10 to 180
am­bi­ent tem­per­a­ture [°C] 0 to 60
Flow Kv [m³/h] 60,4
Ma­te­r­ial in­for­ma­tion LABS con­tain­ing ma­te­ri­als in­cluded,
RoHs com­pli­ant
In­stru­ment hous­ing ma­te­r­ial Cast stain­less steel
Ma­te­r­ial num­ber in­stru­ment hous­ing ASTM A351-​CF3M
Seals ma­te­r­ial NBR
Spin­dle seal ma­te­r­ial PTFE
Seat seal ma­te­r­ial PTFE
Prod­uct weight [g] 8.610
Per­mis­sion CRN
CE cer­tifi­cate (see de­c­la­ra­tion of con­for­mity) to EU ma­chin­ery di­rec­tive
Cer­ti­fied award­ing point CRN0C20829.5C,
TÜV 968/V 1039.00/18
Safety In­tegrity Level (SIL) SIL 2
Prob­a­bil­ity of Fail­ure per Hour in [1/h]. 1.36e-​007
PED (Prob­a­bil­ity of fail­ure on de­mand) 0.000595
Ac­tu­a­tor di­men­sions [mm] 90
Stroke [mm] 26
Con­trol func­tion Closed due to spring force, NC
Po­si­tion de­tec­tion With Me­chan­i­cal dis­play
Ac­tu­a­tor hous­ing ma­te­r­ial Cast stain­less steel
Ma­te­r­ial num­ber ac­tu­a­tor hous­ing 1.4408
Bear­ing tem­per­a­ture [°C] -10 to 60
Pro­tec­tion cat­e­gory IP65,
IP67,
IP69K
Pis­ton rod ma­te­r­ial High-​alloyed stain­less steels
Cover ma­te­r­ial Cast stain­less steel
Further information on OT-FESTO072712
Customs duty number 84818073
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock