VPPE-3-1-1/8-2-420-E1T (557779) proportional pressure

Item number:

OT-FESTO025678

pcs
Properties
Nom­i­nal width ven­ti­la­tion [mm] 5
Nom­i­nal width vent­ing [mm] 2,5
Ac­tu­a­tion type Elec­tri­cal
Seal­ing prin­ci­ple Soft
in­stal­la­tion po­si­tion ar­bi­trary,
Pref­er­en­tially stand­ing
Con­struc­tion set up Pre-​controlled mem­brane con­trol valve
Short cir­cuit re­sis­tance for all elec­tri­cal con­nec­tions
Safety in­struc­tions Safety po­si­tion VPPE: For sup­ply line break, the out­put pres­sure is re­tained un­con­trolled.
Re­verse po­lar­ity pro­tec­tion for all elec­tri­cal con­nec­tions
Valve func­tion 3-way pro­por­tional pres­sure reg­u­la­tor valve
Pres­sure reg­u­la­tor range MPa [MPa] 0,002 bis 0,2
Pres­sure reg­u­la­tion range [bar] 0.02 to 2
Input pres­sure 1 [bar] 3 to 4
Ein­gangs­druck 1 MPa [MPa] 0,3 bis 0,4
Max. Druck­hys­terese (MPa) [MPa] 0,002
Max. pres­sure hys­tere­sis [bar] 0,02
Nor­mal nom­i­nal flow [l/min] 310
Op­er­at­ing volt­age range DC [V] 21.6 to 26.4
Max. power input [mA] 160
Max. elec­tri­cal power con­sump­tion [W] 4,2
resid­ual rip­ple 10 %
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4],
Inert gases
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion not pos­si­ble
Per­mis­sion RCM mark,
c UL us - Listed (OL)
KC-​mark KC-​EMV
CE cer­tifi­cate (see de­c­la­ra­tion of con­for­mity) to EU EMC di­rec­tive
Cor­ro­sion re­sis­tant class KBK 2 - mod­er­ate cor­ro­sion stress
Medium tem­per­a­ture [°C] 10 to 50
Pro­tec­tion cat­e­gory IP65
am­bi­ent tem­per­a­ture [°C] 0 to 60
Prod­uct weight [g] 390
Elec­tri­cal con­nec­tion M12,
5 pin,
Plug
Fas­ten­ing type With through­way bores
Pneu­matic con­nec­tion 1 G1/8
Pneu­matic con­nec­tion 2 G1/8
Ma­te­r­ial in­for­ma­tion Cop­per and PTFE-​free,
RoHs com­pli­ant
Hous­ing ma­te­r­ial Alu­minium wrought alloy,
an­odized
Reset mode Me­chan­i­cal spring
Con­trol type pilot op­er­ated
Dis­play type 3 digit,
LED dis­play
Power-​on time 100 %
Con­trol out­put PNP
Sig­nal range ana­logue out­put 4 - 20 mA
Sig­nal range ana­logue input 4 - 20 mA
Lin­ear­ity error in ± %FS [%FS] 1
Tem­per­a­ture co­ef­fi­cient [%/K] 0,04
Re­peata­bil­ity in ± %FS [%FS] 0,5
Pneu­matic con­nec­tion 3 G1/8
Further information on OT-FESTO025678
Weight 390 g / pcs
Customs duty number 84811099
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available