SRBS-Q12-8-E270-EP-1-S-M8 (2619972) position sensor

Item number:

OT-FESTO058241

pcs
Properties
Design round
Based on standard EN 60947-5-2
Permission RCM mark,
c UL us - Listed (OL)
CE certificate (see declaration of conformity) to EU EMC directive
KC-mark KC-EMV
Special features Oil resistant
Material information halogen free,
RoHs compliant
Measured parameter Angle of rotation
Measurement principle Hall magnetic
Recording range [deg] > 270 deg
ambient temperature [°C] -20 to 70
Sampling interval type [ms] 3
Control output 2 x PNP or 2 x NPN switchable
Switching element function Opener/closer switchable
Reproducibility switch point <= 1 °
Switch on time [ms] < 4 ms
Switch off time [ms] < 4 ms
Max. switching frequency [Hz] 125
Max. output current [mA] 50
Max. switching capacity DC [W] 1,5
Voltage drop [V] < 1 V
Short circuit resistance yes
Overload resistant Available
Rated operating voltage DC [V] 24
Operating voltage range DC [V] 10 to 30
residual ripple 10 %
Reverse polarity protection for all electrical connections
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connection technology M8x1 A coded to EN 61076-2-104
Electrical connection 1, number of pins / wires 4
Electrical connection 1, fastening type Screw lock
Connection outlet direction along
Plug contacts material Copper allow,
Gold plated
Test conditions line Bending radius strength to Festo standard,
Cable track: 5 million cycles, bending radius 28 mm,
Torsional strength > 300,000 cycles, ±270°/0.1 m
Cable length [MTR] 0,3
Line properties Cable track+robot
Cable shield colour Grey
Cable sleeve material TPE-U(PUR)
Fastening type Permanently screwed
installation position arbitrary
Product weight [g] 30
Housing material PA reinforced,
brass nickel-plated,
Polyester
Locking nut material Nickel-plated brass
Foil material Polyester
Switching status indicator LED yellow
Setting options Button
Ambient temperature for moving cable placements [°C] -20 to 70
Protection category IP65,
IP68
Protection class III
Corrosion resistant class KBK 2 - moderate corrosion stress
Further information on OT-FESTO058241
Weight 30 g / pcs
Customs duty number 85365019
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available