Polyethylene tube 1/2" x 9,5 mm, blue

Item number:

PL 1/2 BLAU

m
Item description
Properties:
The lightweight and low-priced polyethylene hoses are suitable for simple applications or applications with increased requirements for chemicals resilience. They are not bending-resistant and tend to deform permanently during processing.

Advantages:
•very good chemicals resilience,
•resistant to water, acids, and alkalis,
•low weight,
•natural colour: FDA approved raw material


Materials:
LD-PE (colour natural: FDA 21 CFR 177.1520 (c) and NSF 51)

Temperature range:
-10 to +60 °C

Shore hardness:
50 D

Roll length:
30 m

Note:
We recommend only cutting these hoses with a sharp tube cutter. Due to the risk of deformation when cutting and the absent rest force of the hose, not all plug connections are suitable for use with this hose. We recommend the use of screw connections with union nuts, PK push in fittings and, if necessary, our push in fitting series IQS Standard (IQS-Inch) and IQS-LE.

Reference values for the pressure utilisation under temperature loading:
to +20°C: 100%, +30°C: 83%, +40°C: 72%, +50°C: 64%, +60°C: 57%
Properties
Hose diameter (outer x inner) [mm] 1/2" x 9,5
Outer diameter [mm] 12,7
colour blue
Operating pressure [bar] 9
Min. bend radius [mm] 60
Further information on PL1/2BLAU
Weight 55 g / m
Packing unit 30 m
Customs duty number 39173900
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available
Weekend shipping

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).