EMCA-EC-67-S-1TM-EP (8061203) Integrated Drive

Item number:

OT-FESTO071156

pcs
Properties
Op­er­at­ing mode con­troller PWN, MOS­FET power end level,
P po­si­tion con­troller,
Cas­cade con­troller with,
PI speed con­troller,
Pro­por­tional and in­te­gral con­troller for cur­rent
Rotor po­si­tion trans­ducer En­coder ab­so­lut multi turn
Rotor po­si­tion trans­ducer mea­sure­ment prin­ci­ple Mag­netic
Pro­tec­tion func­tion I²t mon­i­tor­ing,
Drag error mon­i­tor­ing,
Soft­ware end­point de­tec­tion,
Volt­age black­out de­tec­tion,
Cur­rent mon­i­tor­ing,
Tem­per­a­ture mon­i­tor­ing
Safety func­tion Safe switched off torque (STO)
Safety In­tegrity Level (SIL) Safe switched off torque (STO) / SIL 2
Per­for­mance Level (PL) Safe Torque off (STO) / cat­e­gory 3, Per­for­mance Level d
Dis­play LED
Max. speed [1/min] 3.500
Nom­i­nal ro­ta­tional speed [1/min] 3.100
Brak­ing re­sis­tance, ex­ter­nal [Ohm] 6
Di­ag­nose de­gree of cov­er­age [%] 90
Prop­er­ties dig­i­tal logic out­puts Par­tially freely con­fig­urable,
Not gal­van­i­cally sep­a­rated
Hard­ware error tol­er­ance 1
Max. cur­rent dig­i­tal logic out­puts [mA] 100
Max. pos­i­tive test im­pulse at 0 sig­nal [µs] 10.000
Max. neg­a­tive test im­pulse for 1 sig­nal [µs] 600
Nom­i­nal per­for­mance motor [W] 120
Nom­i­nal volt­age DC [V] 24
Nom­i­nal cur­rent [A] 6,9
Pa­ra­me­ter­is­ing in­ter­face Eth­er­net
Re­port Eth­er­net / IP
SFF Safe Fail­ure Frac­tion [%] > 90 %
Max. num­ber of move­ment sets 64
Rotor po­si­tion trans­ducer res­o­lu­tion [Bit] 12
Peak per­for­mance motor [W] 158
Peak cur­rent [A] 10,2
Per­mit­ted volt­age os­cil­la­tions ± 20 %
Per­mis­sion RCM mark,
c UL us - Rec­og­nized (OL)
KC-​mark KC-​EMV
Cer­ti­fied award­ing point TÜV 01/205/5514.00/16,
UL E331130
CE cer­tifi­cate (see de­c­la­ra­tion of con­for­mity) to EU EMC di­rec­tive,
to EU ma­chin­ery di­rec­tive
Os­cil­la­tion strength Trans­port use test with sever­ity level 2 to FN 942017-​4 and EN 60068-​2-6
Shock re­sis­tance Shock test with de­gree of sever­ity 2 to FN 942017-​5 and EN 60068-​2-27
Bear­ing tem­per­a­ture [°C] -25 to 70
Rel­a­tive hu­mid­ity 0 - 95 %,
Not con­dens­ing
Pro­tec­tion cat­e­gory IP54
am­bi­ent tem­per­a­ture [°C] 0 to 50
In­for­ma­tion about am­bi­ent tem­per­a­ture Above an am­bi­ent tem­per­a­ture of 20 °C, a power re­duc­tion of 1.75 % per °C.
Mass in­er­tia Rotor [kg/cm²] 0,175
Nom­i­nal torque [Nm] 0,37
Peak torque [Nm] 0,85
Per­mit­ted axial shaft load­ing [N] 60
Per­mit­ted ra­dial shaft load­ing [N] 100
Prob­a­bil­ity of Fail­ure per Hour in [1/h]. 1e-​009
PED (Prob­a­bil­ity of fail­ure on de­mand) 1.86e-​005
Proof test in­ter­val [A] 20
Prod­uct weight [g] 1.925
Quan­tity dig­i­tal logic out­puts 24 V DC 2
Quan­tity dig­i­tal logic in­puts 2
Com­mu­ni­ca­tion pro­file FHPP
Logic input spec­i­fi­ca­tion De­pend­ing on IEC 61131-​2
Work area logic input [V] 24
Prop­er­ties logic in­puts Gal­van­i­cally con­nected with logic po­ten­tial
Eth­er­net sup­ported pro­to­cols TCP/IP
Switch­ing logic in­puts PNP (Pos­i­tive switch­ing)
Switch­ing logic out­puts PNP (Pos­i­tive switch­ing)
Fas­ten­ing type With through­way bores,
Per­ma­nently screwed
Ma­te­r­ial in­for­ma­tion LABS con­tain­ing ma­te­ri­als in­cluded,
RoHs com­pli­ant
Op­er­at­ing du­ra­tion ab­solute value en­coder mit ex­terner Bat­terie: 6 Monate,
ohne ex­terne Bat­terie: 3 - 7 Tage
Further information on OT-FESTO071156
Weight 1.925 g / pcs
Customs duty number 85013100
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock
Weekend shipping
left 780 min

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).