Electric PVC ball valve, Rp 1-1/2", Female thread, EPDM-seal

Item number:

KH 112 PVCEP ELI-140

pcs
Item description
Advantages:
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing


Ball valve


Materials:
Body: PVC-U, bridge: PP, seals: EPDM or FKM, ball seat: PTFE

Temperature range:
0 to +60 °C

Operating range:
Industry, water treatment or water supply

Rotary actuator


Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque monitoring unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
Body: PA 6

Temperature range:
-20 to +70 °C

Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
IP 67

Power-on time:
75%

Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
Not suitable for compressed air or other gases under pressure!
Properties
Volt­age [V] 24 to 240 V (AC/DC)
Seals EPDM
Ver­sion Fe­male thread
Thread ball valve Rp 1-1/2"
Ausführung (Elek­trischer Antrieb) Reg­u­lat­ing time 140 sec­onds.
DN [mm] 40
In­stal­la­tion length ball valve [mm] 130
PN [bar] 0 - 16
Flow* [l/min] 1700
Reg­u­lat­ing time [s] 140
Spare dri­ves ELU 230-​2-140
Further information on KH112PVCEPELI-140
Customs duty number 84818081
Documents
*applies to water and 1 bar pressure drop

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock