Electric PVC ball valve, 50mm, adhesive socket, FKM-seal

Advantages:
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing

Ball valve


Materials:
Body: PVC-U, bridge: PP, seals: EPDM or FKM, ball seat: PTFE

Temperature range:
0 to +60 °C

Operating range:
Industry, water treatment or water supply

Rotary actuator


Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque monitoring unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
Body: PA 6

Temperature range:
-20 to +70 °C

Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
IP 67

Power-on time:
75%

Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
Not suitable for compressed air or other gases under pressure!

Voltage [V]	24 to 240 V (AC/DC)
Seals	FKM
Version	adhesive socket
Glue socket Inner diameter of ball valve [mm]	50
Ausführung (Elektrischer Antrieb)	Standard
DN [mm]	40
Installation length ball valve [mm]	143
PN [bar]	0 - 16
Flow* [l/min]	1700
Regulating time [s]	9
Spare drives	ELU 230-2

{{ $t('shop.all.gewicht') }}	2,8 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84818081
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}