pcs
Properties
Po­si­tion drive di­men­sions 0960
Flange drilling screen F14
Swivel angle [deg] 90
Ad­justable range end po­si­tion at 0° [deg] -1 to 9
Shaft con­nec­tion Depth [mm] 38,5
Stan­dard con­nec­tion to fit­ting ISO 5211
Damp­en­ing No damp­en­ing
in­stal­la­tion po­si­tion ar­bi­trary
Prin­ci­ple of op­er­a­tion dou­ble act­ing
Con­struc­tion set up Joch kine­mat­ics
Po­si­tion de­tec­tion with­out
Clos­ing di­rec­tion Right clos­ing
Valve con­nec­tion cor­re­sponds to stan­dard VDI/VDE 3845 (NAMUR)
Safety In­tegrity Level (SIL) Prod­uct can be used in SRP/CS up to SIL 2 Low De­mand,
Prod­uct can be used in SRP/CS up to SIL 2 High De­mand
Op­er­at­ing pres­sure [bar] 1 to 8.4
Nom­i­nal op­er­at­ing pres­sure [bar] 5,6
CE cer­tifi­cate (see de­c­la­ra­tion of con­for­mity) to EU EX pro­tec­tion di­rec­tive (ATEX)
ATEX gas cat­e­gory II 2G
ATEX dust cat­e­gory II 2D
Ex ig­ni­tion pro­tec­tion type gas Ex h IIC T6...T3 Gb X
Ex ig­ni­tion pro­tec­tion type dust Ex h IIIC T85°C...T200°C Db X
Ex am­bi­ent tem­per­a­ture -20°C <= Ta <= +60°C
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:4:4]
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble (re­quired in fur­ther op­er­a­tions)
Cor­ro­sion re­sis­tant class KBK 3 - se­vere cor­ro­sion stress
am­bi­ent tem­per­a­ture [°C] -20 to 80
Ro­tary torque for nom­i­nal op­er­at­ing pres­sure and 0° pivot angle [Nm] 960,0
Ro­tary torque for nom­i­nal op­er­at­ing pres­sure and 50° pivot angle [Nm] 480,0
Ro­tary torque for nom­i­nal op­er­at­ing pres­sure and 90° pivot angle [Nm] 720,0
In­for­ma­tion about torque The op­er­at­ing torque of the ac­tu­a­tor may not be higher than the max­i­mum per­mit­ted torque listed in ISO 5211, re­lated to the size of the fas­ten­ing flange and the cou­pling.
Air con­sump­tion a 6 bar per cycle 0°-90°-0° [LTR] 34,30
Prod­uct weight [g] 17.400
Shaft con­nec­tion T36
Pneu­matic con­nec­tion G1/4
Ma­te­r­ial in­for­ma­tion RoHs com­pli­ant
Cover ma­te­r­ial Alu­minium wrought alloy
Seals ma­te­r­ial FKM,
NBR,
PUR
Hous­ing ma­te­r­ial Alu­minium wrought alloy
Screws ma­te­r­ial High-​alloyed steel
Shaft ma­te­r­ial High-​alloyed steel
Ma­te­r­ial num­ber shaft 1.4305
Further information on OT-FESTO004350
Weight 17.400 g / pcs
Customs duty number 84123900
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
deliverable again in ⌀ 1 days
Weekend shipping
left 525 min

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).