Band-It 316, 6,4 (1/4") mm, Tape (30,5 m roll)

Item number:

C402

pcs
Item description
Band-It - assembly example:


step 1:
Pull the buckle with ears to the tape end on the tape. Form clamps and place tape on tape. Pull the buckle over both tapes and bend the tape end approx. 30 mm under the buckle. When there are high loads on the clamps (e.g. for hose assembly) pull the tape twice through the buckle.

step 2:
Insert tape in the clamping tool from the side, press on the cam lever and tighten the crank clamps by rotating them. The maximum tension is reached when the tape can no longer be pulled under the buckle (this is easily "fulfilled" by applying a finger).

step 3:
After reaching the required tension, bend the tool slowly over the buckle. At the same time, loosen the crank by approx. a half rotation in order to prevent loss of tension and cracks in the tape. In order to crop the tape, pull the cutting lever backwards.

step 4:
Hit the tape onto the buckle with the hammer and fold both buckle ears over to secure the tape end.

Application:
for all applications where high corrosion resistance is required

Assembly tool:
C001, C003

Materials:
rust-free stainless steel AISI 316 (1.4401) with fully rounded edges and high corrosion resistance
Properties
Ver­sion Tape (30,5 m roll)
Width [mm] 6,4 (1/4")
Thick­ness [mm] 0,51
Ten­sile strength at break [N] 1.780
Strap* C452
Further information on C402
Weight 900 g / pcs
Customs duty number 72202041
RoHS compliant Yes
Manufacturer Band-It
Documents
*packing unit: 100 pieces

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available
Weekend shipping

Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).