2/2-way solenoid valve G 3/4" closed (NC) without power,EPDM

Item number:

M 234 EP 230V

pcs
Item description
Materials:
Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
-10°C to max. +85°C (types G 1/8" and G 1/4": -10°C to max. +130°C), environment: max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Control voltage 230 V AC
function closed (NC) without power
Thread G 3/4"
Seals EPDM
Operating pressure [bar] 0,3 - 16
DN [mm] 21
L [mm] 82
Kv value* [l/min] 100
Power consumption (AC) [VA] 10
Structural shape solenoid coil K
Spare solenoid coil MAG K 230V
Media temperature [°C] -10 to +120
Further information on M234EP230V
Weight 750 g / pcs
Customs duty number 84812090
RoHS compliant Yes
Documents
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available