pcs
Item description
Materials:
Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
-10°C to max. +85°C (types G 1/8" and G 1/4": -10°C to max. +130°C), environment: max. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Con­trol volt­age 24 V DC
func­tion closed (NC) with­out power
Thread G 1"
Seals FKM
Op­er­at­ing pres­sure [bar] 0,3 - 16
DN [mm] 25
L [mm] 96
Kv value* [l/min] 160
Power con­sump­tion (DC) [W] 7
Struc­tural shape so­le­noid coil K
Spare so­le­noid coil MAG K 24V=
Media tem­per­a­ture [°C] -10 to +85
Further information on M210V24V=
Weight 1,2 kg / pcs
Customs duty number 84812090
RoHS compliant Yes
Documents
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available